Degree Requirements


Semester 1 
(15 credits)
ENGR1301 Engineering Practices, Graphics & Design
ENWR1101 Academic Writing
MATH1201 Calculus I
PHYS2201 Physics Lab I
PHYS2203 University Physics I
UNIV1001 Transitioning to University Life
Semester 2 
(17 credits)
ENGR1223 Introduction to CAD
ENGR3000 Modern Technologies: Principles, Applications and Impacts                       
ENWR1102 Academic Research and Writing
MATH2202 Calculus II
PHYS2202 Physics Lab II
PHYS2204 University Physics II
UNIV1002 Preparing for Professional Life
Semester 3 
(16 credits)
CHEM1201 General Chemistry I
CHEM1203 General Chemistry I Lab
ENGR2221 Statics
MATH2210 Differential Equations
MENG2232 Mechanical Measurement and Devices
UNIV2001 Cross-cultural Perspectives
Semester 4 
(18 credits)
ENGR1204 Programming Languages in Engineering
ENGR2228 Strength of Materials
ENGR3351 Applied Thermodynamics
ENGR3431 Dynamics
MATH3220 Linear Algebra
MENG2235 Manufacturing Processes
Semester 5
(17 credits)
EENG2221 Signals & Systems I
ENGR4254 Fluid Mechanics
MATH2203 Calculus III
MENG3150 Thermal Systems Analysis & Design
_________ Science Elective*
Semester 6 
(18 credits)
ENGR2210 Technical Communications
ENGR4210 Managerial & Engineering Economic Analysis
ENGR4221 Engineering Statistics & Reliability
MENG3155 Heat Transfer
MENG3230 Computer Aided Design & Manufacturing
UNIV2002 Global Issues
Semester 7 
(16 credits)
ENGR3211 Engineering Materials I
MENG4248 Mechanical Engineering Design I
MENG4355 Analog and Digital Control
MENG4375 Electrical Energy Conversion
MENG4384 Preparation for Senior Design Project
_________ Technical Elective**
Semester 8 
(14 credits)
MENG4360 Industrial Automation
MENG4356 Stress and Vibration Analyses
MENG4386 Senior Design Project
_________ Technical Elective**
_________ Technical Elective**
Total
131 credits

*SCIENCE ELECTIVE:  The student must take 4 credits of a science elective, to be chosen from the following list:

CHEM1202/CHEM1204 General Chemistry II Lecture (3 credits) and Laboratory (1 credit);

BIOL1251/BIOL1253 General Biology I Lecture (3 credits) and Laboratory (1 credit);

BIOL2203/BIOL2223 Human Anatomy and Physiology I Lecture (3 credits) and Lab (1 credit);

PHYS3205 Modern Physics (3 credits) and PHYS4430 Selected Studies in Physics (1 credit).

**TECHNICAL ELECTIVES:  The student must take 9 credits of technical electives, to be chosen from the following list:

CENG3261 Estimating I; EENG2222 Signals & Systems II; EENG3265 Electronics I; ENGR2286 Digital System Design;

ENGR4001, ENGR4002 FE/EIT Exam Preparation I and II; ENGR4263 Project Management in Engineering and Technology;

MENG3288 Microcontroller System Design; MENG4040 Heating, Ventilation and Air Conditioning (HVAC);

MENG4040 Heating, Ventilation & Air Conditioning; MENG4041 HVAC and Refrigeration Controls;

MENG 4250 Mechanical Engineering Design II; and MENG4365 Advanced Fluid Mechanics

Other technical electives may be taken with prior approval from a program advisor.

 

A minimum of 131 credits is required for graduation.